Circular No. 14/2013/TT-BKHCN dated July 12, 2013 of the Ministry of Science and Technology prescribing the metrology for the National Standards

THE MINISTRY OF SCIENCE AND TECHNOLOGY

Circular No.  14/2013/TT-BKHCN dated July 12, 2013 of the Ministry of Science and Technology prescribing the metrology for the National Standards

Pursuant to the Law on Metrology dated November 11, 2011;

Pursuant to the Decree No. 86/2012/ND-CP dated October 19, 2012 of the Government detailing and guiding the implementation of a number of articles of the Law on Metrology;

Pursuant to the Decree No. 20/2013/ND-CP, dated February 26, 2013 of the Government defining the functions, tasks, powers and organizational structure of the Ministry of Science and Technology;

At the proposal of General Director of Directorate for Standards, Metrology and Quality;

The Minister of science and technology promulgates the Circular prescribing metrology applicable to the national standard,

Chapter I

GENERAL PROVISIONS

Article 1. Scope of adjustment

This Circular prescribes metrology applicable to the national standard including: the designation of organizations keeping the national standard, approval for the national standard; maintenance, preservation and use of the national standard.

Article 2. Subjects of application

1. Organizations which are assigned to keep the national standard.

2. State agencies for metrology, and other relevant organizations and individuals. 

Chapter II

ORGANIZATIONS DESIGNED FOR KEEPING THE NATIONAL STANDARD, APPROVING THE NATIONAL STANDARD

Section 1. Conditions to be assigned to keep the national standard, approving the national standard

Article 3. Conditions to be assigned as an organization for keeping the national standard

An organization which meets the following conditions may be assigned to keep the national standard:

1. Having legal status;

2. Having a metrology standard corresponding to suggest being approved as national standard (hereinafter abbreviated to metrology standard suggested for the approval);

3. Having full means, equipment, working premises, environmental conditions and other technical conditions (conditions about voltage, power frequency, anti-vibration, anti-electromagnetic jamming) to perform maintenance, preservation and use of the respective national standard;

4. Having metrologies to ensure safety, fire fighting and prevention, damages, natural disaster; ensure requirements for moving urgently the metrology standard suggested for the approval.

5. There are at least 02 technicians performing the maintenance, preservation and use of the metrology standard suggested for the approval. The technician must meet the following requirements:

a) Graduated university specialized in corresponding technical sector;

b) Foreign languages: English or French or Russian, at level C or equivalent or higher level;

c) Having at least three (03)-year experiences in performing calibration, comparing metrology standard.

6. Diagram of calibration and process of calibration or metrology of comparing the metrology standard suggested for the approval are conformable with the national standards and international standards;

7. Having set up and maintained the management system in conformity with the national standard TCVN ISO/IEC 17025 for maintenance, preservation and use of the metrology standard suggested for the approval.

Article 4. Conditions to be approved as the national standard

A metrology standard which meets the following conditions may be approved as a national standard:

1. Meeting the fundamental requirements for the metrology standard specified in Article 11 of the Law on metrology;

2. Being conformable with the planning on national standard development already approved by the Prime Minister;

3. Being stored, maintained, preserved and used at organization meeting conditions specified in Article 3 of this Circular.

Section 2. MAKING AND HANDLING  DOSSIER

Article 5. Making request dossier for organization designation keeping the national standard, approving for the national standard

1. In case where suggest to be assigned to keep the national standard is made together with the suggest to be approved the national standard, the proposal organization may make a (01) set of dossier and send directly at head office or through post system to the Directorate for Standards, Metrology and Quality (hereinafter abbreviated to the Directorate). Dossier includes:

a) Suggest to be assigned to keep the national standard, approval for the national standard (according to the Form 1a. DNCDPD at Annex enclosed with this Circular);  

b) Technical documents of the metrology standard suggested for the approval (technical description; instruction in maintenance, preservation and use; certificate of calibration, test…) which are supplied by the producing or importing organizations or individuals (in Vietnamese or English or both of 02 languages);

c) A set of pictures includes one (01) overall perspective picture and other pictures of the metrology standard suggested for the approval (pictures of the same size, the minimum size of 90 mm x 120 mm but not bigger than 210 mm x 297 mm, attached on paper at size A4 and notes for each picture) and CD containing those pictures. Pictures taken must be color, clear and must shown shape, name and information of main metrology technical characteristics of the metrology standard suggested for the approval;

d) Copy (certified copying from the original of the proposal organization) of the document about its legal status;

dd) Report on material and technical facilities, and human resource to perform maintenance, preservation and use of the metrology standard suggested for the approval (according to Form 2.BCCS at Annex promulgated together with this Circular);

e) Written regulation on maintenance, preservation and use of the national standard as prescribed in Article 19 of this Circular;

g) Diagram of calibration; process and cycle of calibration or comparison of standard;

h) List of dossier of the management system applicable to maintenance, preservation and use of the metrology standard suggested for the approval.

2. In case of suggesting to be assigned to keep the national standard, the proposal organization may make a (01) set of dossier and send directly at head office or through post system to the Directorate. Dossier includes:

a) Suggest to be assigned to keep the national standard (according to the Form 1b. DNCD at Annex enclosed with this Circular);

b) Copy (certified copying from the original of the proposal organization) of the document about its legal status;

c) Report on material and technical facilities, and human resource to perform maintenance, preservation and use of the metrology standard suggested for the approval (according to Form 2.BCCS at Annex promulgated together with this Circular);

d) Written regulation on maintenance, preservation and use of the national standard as prescribed in Article 19 of this Circular;

dd) Diagram of calibration; process and cycle of calibration or comparison of metrology standard;

e) List of dossier of the management system applicable to the maintenance, preservation and use of the national standard.

Article 6.  Dossier handling

1. Within ten (10) working days after receiving dossier, if dossier has not yet been right with regulation, the Directorate shall notify the proposal organization about contents which need be supplemented, amended.

2. Within thirty (30) working days after receiving full and valid dossier, the Directorate shall decide the assessment at facility.

Section 3. ASSESSMENT AT FACILITY

Article 7. Methods and principles

1. The assessment at facility is performed according to the method of the assessment delegation.

2. The assessment at facility is performed according to the expert principle.

Article 8. Assessment delegation

1. The general director of Directorate for Standards, Metrology and Quality shall decide establishment of the assessment delegation for assessment at facility, the assessment delegation shall report result and advice the general director of Directorate for Standards about the conformity of the proposal organization and of the metrology standard suggested for the approval in comparison with requirements prescribed in this Circular.

2. Members of the assessment delegation

a) The assessment delegation includes head of delegation, civil servant and other members. Number of members of the assessment delegation is not less than three (03) persons;

b) Head of delegation is person who has prestige in the metrology sector. Head of delegation shall:     Organize implementation of tasks of the assessment delegation; assign specific duties to members; convene and preside over meetings of the assessment delegation; decide invitation of delegates for participation as necessary; approve the dossier of the assessment result before submit to the Directorate;

c) The secretary is civil servant doing task of managing metrology of the Directorate.  The secretary shall:   Prepare for the assessment program (according Form 3.CTDG at Annex promulgated together with this Circular), assessment vote (according to form 4.PDG at Annex promulgated together with this Circular), record fully and honestly opinions; collect the assessment votes of members in the assessment delegation; make record to sum up the assessment result (according to Form 5.BBTH at Annex promulgated together with this Circular) to have meetings to approve the assessment dossier; 

d) Other members of the assessment delegation are science cadres operating in the suitable metrology sector invited from Ministries, sectors, enterprises, universities, organizations of science and technology, relevant social-professional organizations or independent experts.     Members shall perform tasks assigned and take responsibilities for content, result of performing tasks.

Article 9. Assessment content

1. The conformity of the proposal organization with conditions specified in Article 3 of this Circular.

2. The conformity of the metrology standard suggested for the approval with conditions specified in Article 4 of this Circular. 

Article 10. Assessment method

In the course of assessment, members of the assessment delegation may apply one or all the following assessment methods:

1. Directly interviewing the main responsible person, technicians of the proposal organization about related information.

2. Considering the archived dossier and relevant documents.

3. Observing reality of the metrology standard suggested for the approval, means, equipment, working premises, environmental conditions and other technical conditions to perform maintenance, preservation and use of the national standard;

4. Assessing the proficiency of technicians, the conformity of calibration process, regulation on maintenance, preservation and use through observing manipulation and handling the calibration result or comparing the metrology standard performed by the technicians.

Article 11. Assessment implementation

1. Head of delegation keeps meeting for assessment, approve the assessment program, assign tasks and unify plan on assessment under the progress, content of assessment prescribed in decision on establishment of the assessment delegation.

2. According to the assessment method prescribed in Article 10 of this Circular and the assigned content of assessment, members carry out assessment and write the assessment result on the assessment vote.

3. Head of delegation keeps meeting to approve dossier of assessment at facility.

4. The assessment must be finished within thirty (30) days after the date of signing decision on establishment of the assessment delegation. Cost and other conditions serving the assessment on the spot of the assessment delegation are covered by the proposal organization.

Article 12. Dossier of the assessment result

Within five (05) working days after finishing the assessment, head of delegation shall submit a (01) set of dossier of the assessment result to the Directorate. A set of dossier includes:

1. Decision on establishment of the assessment delegation;

2. The assessment program;

3. Members’ assessment votes;

4. A minutes summing up the assessment result.

Article 13. Handling dossier of  assessment result

1. Within three (03) working days after receiving dossier of the assessment result, if the assessment result at facility fails to meet requirement as prescribed, the Directorate shall notify in writing the proposal organization thereof.

2. Within three (03) working days after receiving dossier of the assessment result, if the assessment result at facility fails to meet requirement as prescribed, the Directorate shall notify in writing the proposal organization thereof. A set of dossier includes:

a) Official dispatch of the Directorate;

b) Dossier of the assessment result prescribed in Article 12 of this Circular;

c) Dossier requesting for the national standard approval, designation of organization keeping the national standard prescribed in this Circular.

Section 4. Decision on approval for the national standard, designation of organization keeping the national standard

Article 14. Decision on approval for the national standard, designation of organization keeping the national standard

1. Pursuant to the dossier submitted to the Directorate, the Minister of science and technology shall consider and decide approval for the national standard, designation of organization keeping the national standard (hereinafter abbreviated to decision on approval and designation).

2. Decision on approval and designation includes the following main contents:

a) Name of the metrology field, metrology quantity;

b) Name of national standard;

c) Sign number;

d) Code number of national standard;

dd) Place of manufacture, year of manufacture of the national standard;

e) Scope of metrology, the precision or degree of accuracy, and other necessary technical metrology characteristics of the national standard;

g) Name, address of the organization which is assigned to keep the national standard.

3. In case where a (01) decision on approval and designation is promulgated to approve concurrently two (02) national standards or more and assign an (01) organization keeping those national standards, contents prescribed in points a, b, c, d, dd and e must be inscribed separately for each national standard.

4. Decision on approval and designation shall be sent to the organization assigned to keep the national standard.

5. Decision on approval and designation prescribed at Clause 2 of this Article and pictures of the national standard prescribed in point c Clause 1 Article 5 of this Circular are posted on website of the Ministry of science and technology and the Directorate.

Article 15. Storing approval dossier for the national standard, designation of organization keeping the national standard

1. The stored dossier of approval for the national standard, designation of organization keeping the national standard includes: Decision on approval and designation as prescribed in Article 14 and dossiers prescribed in Clause 2 Article 13 of this Circular.

2. A (01) set of dossier of approval for the national standard, designation of organization keeping the national standard is stored at the Directorate.

3. The organization assigned to keep the national standard shall make and store a (01) set of dossier of approval for the national standard, designation of organization keeping the national standard.

4. Time limit for storing dossier: Five (05) years after decision on approval and designation is adjusted or revoked.

Section 5. SUSPENSION, EFFECT REVOCATION, SCOPE ADJUSTMENT OF DECISION ON APPROVAL AND DESIGNATION

Article 16. Decision effect’s suspension on approval and designation

1. Suspension of the effect of decision on approval and designation is applied in the following cases:

a) Organization assigned to keep the national standard fails to finish responsibilities as prescribed in Article 22 of this Circular.

b) Organization assigned to keep the national standard has written proposal for suspension of keeping the national standard.

2. Depend on each specific case, on the basis of proposal of the Directorate, the Minister of science and technology shall issue a decision to suspend entirely or partly effect of the decision on approval and designation (abbreviated as decision on suspension) Time limit for temporary suspension does not exceed six (06) months after the effective time of the decision on suspension.

3. Decision on suspension is sent to the organization assigned to keep the national standard and posted on website of the Ministry of science and technology and the Directorate.

4. During duration of temporary suspension specified in Clause 2 of this Article, after finishing the remedy of consequences due to failing to perform responsibilities as prescribed in this Circular, organization subject to decision on suspension is entitled to make a (01) set of dossier requesting the re-designation and send directly at head office or via post office to the Directorate.     A set of dossier includes:

a) Official dispatch proposing for the re-designation;

b) Documents, dossiers of which the remedy of consequences has finished.

5. Depending on specific case, the Directorate shall decide examination on dossier or assessment at facility for content proposing for the re-designation.

6. Within five (05) working days after receiving dossier, if dossier is not proper with regulation, the Directorate shall notify the proposal organization about contents which need be supplemented, amended.

7. In case of examination on dossier, within seven (07) working days after receiving full and valid dossier, the Directorate shall make a dossier and submit it to the Minister of science and technology.  Dossier includes:

a) Official dispatch of the Directorate;

b) Dossier proposing for the re-designation prescribed in Clause 4 of this Article.

8. In case of assessment at facility, the handling of dossier and assessment at facility shall comply with Clause 2 Article 6 and section 3 Chapter II of this Circular.

9. Pursuant to the dossier submitted by the Directorate, the Minister of science and technology shall consider, decide approval, re-designation as prescribed at Article 14 of this Circular.

10. Dossier of the re-designation is stored as prescribed in Article 15 of this Circular.

Article 17. Effect evocation on approval and designation decision

1. Effect evocation on approval and designation decision is applied in the following cases:

a) An organization which is assigned to keep the national standard is bankrupted or dissolved as prescribed by law.

b) An organization subject to decision on suspension fails to finish the remedy of consequences although time limit for temporary suspension is expired;

c) An organization which is assigned to keep the national standard has a written request for not continuing keeping the national standard as being assigned;

d) The national standard is lost, damaged which cannot remedy.

2. On the basis of proposal of the Directorate, the Minister of science and technology shall issue a decision to revoke effect of the decision on approval and designation (abbreviated as decision on revocation of effect).

3. Decision on revocation of effect is sent to organization which is assigned to keep the national standard and posted on website of the Ministry of science and technology, and website of the Directorate.

Article 18. Content adjustment on approval and designation decision

1. Case of proposal for adjusting name, address of the organization which is assigned to keep the national standard

a) The organization which is assigned to keep the national standard make a (01) set of dossier to propose for adjusting scope of approval and designation, and send directly at head office or through post system to the Directorate. A set of dossier includes:

- Official dispatch proposing for adjustment;

- Making a commitment in which there is no change about the national standard, and conditions to maintain, preserve, use the approved national standard;

- Other relevant documents.

b) Within five (05) working days after receiving a full and valid dossier, the Directorate shall consider, make a dossier and submit it to the Minister of science and technology.  A dossier includes:

- Official dispatch of the Directorate;

- Dossier approving for adjusting scope of approval and designation as prescribed in point a this Clause.

2. In case of proposal for adjusting other contents of the decision on approval and designation relating to change of capability of the organization assigned or change the metrological technical characteristic of the national standard

a) The organization which is assigned to keep the national standard makes a (01) set of dossier to propose for adjusting scope of approval and designation, including: An official dispatch clearly state content of proposal for adjustment; documents relating to change of capability of the organization assigned or change the metrological technical characteristic of the national standard;

b) The handling of dossier of proposal and assessment at facility shall comply with Clause 2 Article 6 and section 3 Chapter II of this Circular.

3. Pursuant to the dossier submitted by the Directorate, the Minister of science and technology shall consider, decide approval, designation as prescribed at Article 14 of this Circular for the adjusted content.

4. Dossier of the national standard shall, after being adjusted content of decision on approval and designation, be stored as prescribed in Article 15 of this Circular.

Chapter III

MAINTENANCE, PRESERVATION AND USE OF THE NATIONAL STANDARD

Article 19. Provisions on maintenance, preservation and use of the national standard

Provisions on maintenance, preservation and use of the national standard include the following main contents:

1. For the maintenance and preservation:

a) Area of place for the maintenance and preservation;

b) Environmental condition and other technical conditions;

c) Metrologies to ensure safety, fighting and prevention against fire, explosion, natural disaster, loss or fault of the national standard; metrology for emergency moving;

d) Periodical control over conditions of maintenance and preservation;

dd) The internal calibration or inter-laboratory comparison of the national standard; proposal for metrologies to handle result of internal calibration and inter-laboratory comparison;

e) Requirements on maintenance, preservation and use of means, equipment to perform maintenance and preservation of the national standard;

g) The assignment and responsibility of persons doing task of maintenance and preservation.

2. For the use:

a) For activities of calibration or comparison of the national standard with international standard or the national standard of other countries:

- Cycle of calibration or comparison;

- Requirements on packaging, transport, preservation, on control of dossier, documents, conditions of the national standard and relevant equipment …. prior to and after performing; proposal for metrologies to handle result after performing calibration or comparison of the national standard.

b) For activities of calibration or comparison to transfer the accuracy of the national standard to the metrology standard with lower accuracy:

- Area of place for use;

- Environmental condition and other technical conditions;

- Metrologies to ensure safety, fighting and prevention damage to the national standard due to use inconformity with regulation;

- Assigning and prescribing responsibility of persons assigned to perform calibration or comparison;

- Requirements on maintenance, preservation and use of means, equipment to perform calibration or comparison;

- Taking notes on use diary.

Article 20. Implementation of provisions on maintenance, preservation and use of the national standard

The maintenance, preservation and use of the national standard must be performed in accordance with regulation which is promulgated by the organization assigned to keep the national standard.

Chapter IV

IMPLEMENTATION PROVISIONS

Article 21. Responsibilities of the Directorate for Standards, Metrology and Quality

1. To examine, assess, complete dossier and submit it the Minister of science and technology for considering and approving the national standard, assigning organization to keep the national standard.

2. To manage activities of maintenance, preservation and use of the national standard.

3. On a two (02) year basis, or at request of the superior agency, the Directorate shall examine the national standard and activities of maintenance, preservation and use of the national standard which are made by the assigned organization.

4. To inspect as prescribed by law on inspection for the compliance with this Circular and other law relating to organizations of organization assigned to keep the national standard.

Article 22. Responsibilities of organizations which are assigned to keep the national standard

1. To research science, application and development technology about the metrology standard; formulate methods to maintain and preserve the national standard; formulate the measurement method to transfer the accuracy of the national standard to the metrology standard with the lower accuracy.

2. To maintain, preserve the system of management and perform maintenance, preservation and use of the national standard as prescribed in this Circular and other relevant law.

3. To report timely mistakes, faults of the national standard and propose metrology to remedy or propose for suspension, revocation of effect of decision on approving the national standard, assigning organizations to keep the national standard.

4. To comply with inspection, examination and other provisions of relevant law.

5. To comply with provisions in this Circular and other provisions of relevant law.

Article 23. Effect

This Circular takes effect on August 30, 2013.

Article 24. Implementation organization

1. The General Director of Directorate for Standards, Metrology and Quality shall guide and organize implementation of this Circular.

2. Heads of state agencies, relevant organizations and individuals shall implement this Circular. 

3. In the course of implementation, any arising problems should be timely reported in writing to the Ministry of science and technology for research, suitable amendment and supplementation.

For the Minister of Science and Technology

Deputy Minister

Tran Viet Thanh

------------------------------------------------------------------------------------------------------
This translation is made by LawSoft, for reference only. LawSoft is protected by copyright under clause 2, article 14 of the Law on Intellectual Property. LawSoft always welcome your comments